MCS Dampers Instructional Video: Hydraulic Front-Axle Lift
Refer to the video and diagrams below for an in-depth guide on how to install our MCS dampers with Hydraulic Front-Axle Lift for 991.2 GT3RS/GT2RS.
Dundon MCS Dampers with Hydraulic Front Axle Lift
For a long time you had to sacrifice your street drivability if you wanted to upgrade to a motorsports damper.
We include options for springs/no springs or with/without PASM deletes modules.
Kit includes:
2-Way 3-Way or 4-Way Remote Damper System
Tailored spring rates for your driving style
Install Hardware Kit
Reservoir Mounting Kits
(From the MCS website)
The MCS 3-Way damper is a triple-adjustable damper with external reservoirs which allow for adjustment of the gas pressure in the damper. High speed compression, low speed compression, and rebound damping forces are independently adjustable with the compression adjusters located on the reservoir head and the rebound adjuster located on the shaft-end.
High Speed Compression damping forces are controlled by a large blow-off valve located directly on the reservoir main piston for the most precise and accurate damping control, and not a needle valve with a smaller effective adjustment range before the needle is too far out of the orifice to influence flow.
Please see diagrams below for assembly:
